XBW 3.0 Boot Scrubber & Footwear Sanitizing System

The XBW 3.0 Automated Boot Washing Station is designed for high-volume facilities, scrubbing & sanitizing footwear without laces of 15 – 20 employees per minute in as little as three seconds! The XBW 3.0 continuously applies sanitizing solution to boots through a series of high-pressure nozzle jets. CIP friendly & designed for wet, industrial environments, prevent cross-contamination with the the XBW 3.0 boot scrubber.

Overview

Continuous boot scrubbing system
Designed for high-volume operations
Cleans quickly and efficiently
Most compact walk through boot scrubber on the market
Bidirectional Photoeye Operation
Adjustable Sole Depth
Tool-less Easy Brush Removal
Ready Indicator Light
Wash Indicator Light
Main Power Shut Off Switch
Solution Empty Indicator
CIP Friendly
Non-Slip Surfaces
Optional Heavy-Duty Brushes for Stubborn debris

Discover Automatic Boot Washers:

Specifications

Dimensions:34" width x 82" length x 48" height. 44 3/8" width with soap basket
Horizontal Brush Length: 35"
Weight: 650 lbs. approximately
Shipping Weight: 950 lbs.
Cycle Activation: photoeye operation, bidirectional
Water Consumption: 0.3 - 0.5 gallons at an 8-second cycle
Electrical:120 VAC, 50/60 Hz, 1300 W running, 20 AMP breaker. International voltages available
Plumbing Inlet: 3/4" male garden hose, minimum 4 GPM, 1000 F Max 40-50 PSI maximum, cold line (System equipped with a pressure regulator)
Drain: 2" MNPT Drain Pipe. (Floor drain required.)
Solutions Storage: 1 — 5-gallon sanitizing solution container
Solutions Compatibility: Required sanitizing solutions provided only by Meritech