Installing the Sole Clean Sanitizing Pan Enhancement

1. Unpack the Enhancement for the EVO One per the instructions on the box.

2. Place the boot dip pan in front of the EVO One station, making sure that the pan is centered to the system and sitting level and does not rock. 

3. Attach the supplied Sanifect D2 container basket to a wall that can support 70 lbs. vertical force.

4. Place Sanifect D2 bottle in basket and place pickup tube in bottle. Tube is attached to the system.

5. Place the three mats into the pan, ensuring that they are in the correct order from bottom to top: • Black bubble mat first • Grey absorptive mat (with soft side up) next • Red foot placement mat (with grip knobs upward) on top

6. Verify that the solution tubing is not kinked.

7. Press the unlock button on the touch screen and enter your customer pin number.

8. Once in the main menu, prime the pan by pressing the "Prime Pan" button shown in the photo. The pan will begin to fill, if additional fluid is desired, press the "Prime Pan" button again till the desire level is achieved.