We will now review the displays that are accessible to you now that the CleanTech® station has been setup, configured and solution cartridges have been installed. These areas of the display can be accessed at any time now that the station has been setup.

Navigating the Home Screen

The home screen will always show on the CleanTech® EVO station. This screen will cycle through the handwashing instructions (shown on the next page) and will display key information including:

• Date and time (this can be configured in settings if not connected to Wi-Fi)

• Remaining hygiene events and hygiene solution levels for UltraPure and SelfClean (if applicable)

• Lock icon for quick access to the administrative area for additional settings.

Handwashing Instructions

The steps on how to wash your hands with a CleanTech® Automated Handwashing Station are always cycling through on the screen for quick reference. Hygiene tips will also show on the home screen communicating the importance of handwashing in preventing the spread of harmful pathogens. These instructions and tips show in both English and Spanish. For help with additional languages, please contact the Meritech support team.

Countdown Timer

During the automated hand wash, a countdown timer will display a large 12 second countdown timer. The purpose of this timer is to improve handwashing compliance and encourage users to keep their hands in the station for the full duration of the automated handwashing cycle. Once hands have passed the photoeye sensor and initiated the hand washing cycle, the system will go into a 1 second priming mode to prime the cylinders with water. This is followed immediately by the 12 second automated hand wash cycle with rinsing, washing and final rinse.

Administrative Area of the Touchscreen Display

These are only accessible to administrators who are authorized with the pin to configure the station and view hygiene compliance information. These areas of the display can only be accessed with the customer pin.

Customer PIN Check

Once You Touch the Lock Symbol on the home screen, the Customer PIN Check Screen Appears. Enter Last 4 Digits of Customer # and Press “E” to Access Main Menu

Main Menu

Once in the Main Menu, you can select any of the following sub-menus. This will guide you to the specific area. Menus with a * symbol are only accessible by Meritech Technicians.

Settings

• Network
• Units
• Date & time
• Water temperature
• Language

System Health

System Health Screen gives real time data on the health of the facility and system, as well as current solutions levels, & any error codes. If one of these settings is out of parameter, a station error code will be displayed. Some of these items might self-correct in time. For instance, if the facility hot temperature is too cold, and if hot water returns to normal temperature range, the code will clear.

Training

The Training menu you allows you an easy way to onboard new staff members on how to use the station by watching a video. The EVO station also has a video on how to change solutions for your maintenance team. There are also QR codes under Owners Guide and Meritech Website that will guide you to many documents to help with all your hygiene needs.

Compliance

Within the Compliance menu you will be able to perform a few functions, such as Enable or Disable the Auto Count Reset. Auto Count Reset allows for a time of day you chose for the Hygiene Events in the Home screen to be reset to zero. When feature is Enabled, the standard time is 2 AM. This reset does not clear the Historical Hygiene Event log or master counter for the station. When the Historical Hygiene Events button is pressed, you can see histogram graph of the hygiene events for each EVO handwashing station. When you click on the word "daily" there is a dropdown menu allowing you to see the data in several configurations to meet your needs including daily, weekly, monthly and total.

Product Support

The Product Support screen displays the system model, system serial number, manufactured date, software revision level, customer ID, customer pin #, last service date, & last calibration date. This station has already been calibrated to ensure maximum performance. For calibration information see the CleanTech station's "Product Support" screen or reach out to the Meritech support team.