- View All Lessons
Before You Start
Install Your Equipment
Enhancements Install
Additional Support
Boot Dip enhancement install
For this install you will need:
- Unpack the boot pan and place in front of the 4000S per the photo below.
- Make certain that the pan is sitting level and does not rock.
- Pull the pan away from the system and attach the two drain hoses, one to each of the ¾” male pipe threads on the back of the pan drain box. See photos below
- Take the water supply line and connect to the fitting on the bottom left side of the system. See photo below. Make certain the supply line is pushed at lease 3/8” – ½’ in to the fitting.
- Take the opposite end of the supply line and attach it to the pan manifold. See photo below.
- Push the Boot Sanitizing Pan into the system, making certain the 2 tabs are on the inside legs of the CleanTech 4000S system.
- Once pan is in place make certain the 2 drain hoses are directed towards the floor drain, and that they are flat to prevent the pan from overflowing.
Great work, you're done! If you have additional enhancments click below for install instructions