Thank you for joining the hygiene revolution and choosing to use CleanTech® EVO Automated Handwashing Stations to ensure hygiene excellence at your facility! We designed the CleanTech EVO series to provide your facility with an automated, state of the art system that meets or exceeds your hand washing requirements for compliance, standardization, and effectiveness. Before you dive in, here’s some important information you need to know:

Help and support

The first thing you need to know about us is that we're more than just an equipment manufacturer. When you partner with Meritech, our hygiene experts are here to help make sure that you have everything you need for hygiene excellence at your facility, starting with choosing the perfect place for your new automated hygiene equipment.

One of the most important parts of installing a CleanTech® station is choosing the right area for it at your facility. Select an area for installation that encourages frequent use for maximum hygiene compliance. We recommend positioning the CleanTech® station in the main work area, lunch facilities, restroom facilities, and close to the entrance and exit doors.

If you need assistance designing your hygiene zone or selecting the perfect place to install your system, please contact us for a hygiene zone consultation at: https://www.meritech.com/hygiene-zone-design-consultation

If you need any help with your CleanTech® station, our Colorado-based support team is just a phone call or email away! Contact them anytime Monday through Friday 8am-5pm MT at: (800) 932 7707 or support@meritech.com

Location of the install

One of the most important parts of installing a CleanTech^® station is choosing the right area for it at your facility. Select an area for installation that encourages frequent use for maximum hygiene compliance. We recommend positioning the CleanTech^® station in the main work area, lunch facilities, restroom facilities, and close to the entrance and exit doors.

If you need assistance designing your hygiene zone or selecting the perfect place to install your system, please contact us for a hygiene zone consultation at: https://www.meritech.com/hygiene-zone-design-consultation 

Optional enhancements

The EVO Wall could come with additional CleanTech^®  Enhancements. Please follow the additional instructions for these enhancements as you're installing the system. The enhancements available with the EVO Wall are: 

Air Curtain

At the end of every wash cycle, a curtain of air blows air on to the hands to partially dry them, reducing paper towel waste. This enhancement is ideal for companies seeking a “greener” footprint. The integrated air curtain for the CleanTech^® Handwashing Stations uses the facility's CDA source (compressed air) to maintain sanitary standards that other air dryers can’t match. The optional air curtain enhancement on the system will automatically turn on at the end of the cycle and blow compressed air on to the hands as long as the photoeye is blocked or it can be programed to run for a set length of time. The air curtain can be used to remove a majority of the water drops in just about 3 seconds or to completely dry the hands in approximately 35 seconds.

The air curtain needs a 3/8” inside diameter supply line, 19 SCFM at 25-30 for optimal performance, not to exceed 50 PSI. Pressure regulator is not supplied. May be installed external to system.

Self Clean

The optional Self Clean cycle initiates automatically on a factory preset schedule at 3 AM (or customized time) and dispenses a sufficient amount of the SelfClean_X hard surface cleaner to eliminate microorganisms and hard water deposits from the hand wash cylinders, internal basin, and through to the facility drain. The Self Clean cycle will initiate once per day. Each SelfClean_X cartridge will last approximately 60 days.