|
The CleanTech 2000 series works in any workplace environment, from clean rooms to high traffic industrial. The 2000 model is available with many options providing a high degree of flexibility to meet specific user needs. The 2000S Series utilizes the patented Meritech hand hygiene technology to provide a highly efficacious pathogen destruction cycle with proven solution, water and time savings, plus a self-cleaning feature and a variety of optional add-on features that enhance its applications.
The unit can be equipped with an optional boot sanitizing system that provides simultaneous hand and boot cleaning/sanitizing. The 2000S Series is typically applied at multiple points-of-entry to many types of industrial processing rooms, as an allergen isolation process and in food, electronic, industrial and medical clean rooms.
Stainless Steel, Floor Model, Polypropylene Internal Plumbing, Trickle-through Water Valves, DC Brushless Motor, User Programmable Hand/Glove Wash & Rinse Cycles
CleanTech® 2000SSC (Floor Model)-
Unit is equipped with a self clean feature SSC unit - every 24 hours self-sanitizing cycle begins automatically. (Not avail on 400 or 500 series) Self-cleaning feature designed to help rid bacterial contamination in the cylinders and sanitizes the drain systems which can also become contaminated - 2000SSC unit injects a high power surface disinfectant to sanitize the inside surfaces of the cylinder as well as the drain system.
2000SCR Clean Room model - The 2000S Clean Room model has Polypropylene Internal plumbing, trickle through water valves, A DC brushless motor, and user programmable hand and glove washing & rinse cycles.
System Benefits:
Compliance Monitor - Not only does CleanTech® perform the wash so you know it's being performed correctly, it also provides a cycle counter so that hand washing frequency can be easily verified for your SSOP, HACCP, and GMP programs.
Solutions Monitor - Indicates handwash solution flow. Empty reading indicates empty solution containers; Normal reading indicates satisfactory solution flow; and Blocked reading indicates blocked solution line.
Self-Clean Monitor - Indicates Self-Clean flow. Self-Clean is used in the CleanTech Model 2000S system as a hard surface cleaner to eliminate bacteria colonization in the system and facility drain attached to the system. Self-Clean cycle initiates every 24 hours unless programmed differently. It can also be used for a Boot Sanitizing Station. See Boot Sanitizing Station description on back of this sheet.
Stainless Steel, Corrosion-Resistant - The system can be installed in wet, cold environments where sanitation is performed and uses corrosion-resistant componentry inside and out (NEMA 4X and 6 rated).
Accessories:
Four-Gallon External Booster Water Heater - This 110 volt, 1500 watt heater is ideal for applications where the hot water heater is a long distance from the CleanTech system or where hot water lines travel through cold areas. It provides 16 warm washes and replenishes hot water in 15 minutes.
The Boot Sanitizing Station
Station Dimensions:
18-1/2" L x 18-1/2" W x 5" H
3/8" thick rubber ribbed mat
1" NPT inlet and outlet fittings
Drain tubing from CleanTech system to boot sanitizing station supplied, along with installation instructions.
Description - The Boot Sanitizing Station option for CleanTech 2000S is designed as follows:
A 18-1/2" x 18-1/2 x 5" deep stainless steel open-topped pan is placed in front of the CleanTech system so that the user may stand in the pan to operate the system. The pan may also be positioned away from the system at a plant entrance. The drain line from the CleanTech system is piped into the Boot Sanitizing Station. The station then drains to the floor drain. The CleanTech unit is electronically programmed to activate a self-clean cycle every 5 handwashes. This will maintain the quat level in the pan at approximately 400 ppm unless programmed differently. This option greatly reduces labor required to maintain manual boot sanitizing stations. In addition, with this option on the 2000S, the employee gets sanitized hands and boots at the same time.
Actual depth of pan is 4". Total height of pan with legs is 5".
Standing water level is either 1/2" or 1-3/4" depending upon which fitting is used for water inlet and which is used for water outlet.
Floor drain is required.
2000S
Optional Accessories:
Air Curtain
Heated Air Curtain
PVDF/Teflon Internal Plumbing
Cabinet Exhaust
Casters (2 Fixed)
Solutions Aspiration
Solution Door Lock
|
2000SSC
Stainless Steel, Floor Model, Self Cleaning
Optional Accessories:
Boot Sanitizing Station
2.5 Gallon Internal Water Heater
Air Curtain
Heated Air Curtain
Casters (2 Fixed)
Solutions Door Lock
Four Gallon External Booster Water Heater
|
Other Specifications:
| 
